The Blazn Grill PID arrives.
I'm going to have to move my smoke daddy smoke generator to the backside of the hopper and put a 7/8" plug in the hole it left.
Out goes the old ortech knockoff.
Took out old RTD and used a 3/4" L bracket to mount the new RTD horizontally fairly close to grate level. Drilled a small hole below the existing top hole for a 10-32 bolt to secure the RTD.
Had to use different holes than the old ortech holes on the new PID.
Top bolt/nut on the PID will be inside the hopper.
Cleaned out the grill to give the new PID a fresh start.
Success!!!
I will admit it is going to take me a while to get used to the constant oscillation of the fan going on and off around target temp.
Please forgive my poor picture taking ability.