So I had dual blow outs on BOTH of my pellet grills within a month or so. Anyway I thought I would let everyone know that a good cleaning of the burn pot and pellet hopper is a good thing to do before your start of the heavy use season.
This is my ho trod from my TREAGER.
Look close at the burn pot hole. Before I pulled the wires from the control area under the hopper were the controller is I tied a string to the plug end and when I pulled out the hot rod wire that runs through the supply air box I had a line to pull the new hot rod wire through the supply air box backwards to re hookup!
All together and ready to fire up.
Done and ready for action.
My Woodmaster was just 2 screws and pulled the old hot rod out and replaced... about 7 minutes! Great design.
I emptied the pellet hopper out and cleaned out the dust that collects at the auger. Helps auger performance.
No pics ... pretty basic.
I know we all don't have pellet grills but what ever you have.... never hurts to do a good cleanup every once in awhile.