Let's Talk BBQ
MEMBER VIDEOS => Videos => Tomcrete1 => Topic started by: tomcrete1 on June 24, 2017, 10:27:15 AM
-
Weber Kettle Modification adding a Temperature Probe Port
Found it on Amazon just type in BBQ Grill Temperture Probe Port
The probe I showed is from the Thermoworks Smoke
http://youtu.be/kOqVqZZSnos
-
Nice mod and video Tom. I did the same with my kettle awhile back. Here is the link to the ones I used. I am not sure if they are the same, but they look like they are.
https://smile.amazon.com/gp/product/B00B0Q7EJS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
They say not available now, but this is only 1 size they have several from this company.
-
I use these grommets in both the kettle and WSM.
www.cajunbandit.com/product-p/38bbqsg.htm
-
I use these grommets in both the kettle and WSM.
www.cajunbandit.com/product-p/38bbqsg.htm
The larger ones work well in the kettle and WSM IF you are using a Maverick or similar thermometer. The Smoke probes are too large to work with those.
-
Tom: This looks like a good idea, as I do not like to run the cables between the lid and kettle. Is there going to be any problem with heat on the o-ring or that inner adjustable liner?
-
Tom: This looks like a good idea, as I do not like to run the cables between the lid and kettle. Is there going to be any problem with heat on the o-ring or that inner adjustable liner?
Thanks for Watching! Others I know have used this and they say no, I'm gonna try it tomorrow and we'll all find out
-
Nice mod and video Tom. I did the same with my kettle awhile back. Here is the link to the ones I used. I am not sure if they are the same, but they look like they are.
https://smile.amazon.com/gp/product/B00B0Q7EJS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
They say not available now, but this is only 1 size they have several from this company.
Thanks Mike!
-
I use these grommets in both the kettle and WSM.
www.cajunbandit.com/product-p/38bbqsg.htm
Good idea!