FORUM SPONSORS > Savannah Stoker Pellet Grill Control System

Stoker Log

(1/3) > >>

jlhile:
I can't seem to get the fan cable (for the Savannah) to show as my blower on my stoker log. If I go to my stoker (White model) it shows it as a blower and what I named it. but won't show on the stoker log.. Any Ideas?

Thanks

Savannah Stoker Controller:
In the Stoker associate the blower to a pit temp sensor for fire control.
The fan activity will show up at the bottom of the graphic. You will not see the blower listed separately like the temperature sensors.

jlhile:
Sorry a bit confused... I messaged you on FB.

Savannahsmoker:
On the bottom of the chart a verticle black line will show every time the auger is running.

In the following case below the 170 temp line.



Hope this helps.

jlhile:
Here lies my problem, it keeps running. Attached are 2 pictures. one which has 4 windows in the top left is without the savannah cable attached. once I attach and refresh it goes to 3 windows and the brisket showing the "Fire" and the blower keeps going increasing the temp.. I have the actual Savannah set to 160.

Hope this helps

See attached pics

[attachment deleted by admin]

Navigation

[0] Message Index

[#] Next page