Did you add those extensions that the wheels are screwed into? My MAK #0 doesn't have those..
Yep. I did a writeup on another forum and since I don't know if I can post a link, I will just do a cut and paste.
When I was looking for a pellet grill I went to a dealer who had a 1 Star and a 2 Star side by side. One of the first things I noticed was the difference in cooking heights between the two with the 1 Star being 32” and the 2 Star being 35” which felt like the right height for me. The problem was that I really wanted the 1 Star, so that’s what I purchased with the intention of increasing its cooking height.
So this is how I made the 1 Star taller. I had a local machine shop make risers (spacers) that were 2 inches in diameter and 2.5” long with 3/8-16 holes in each end. I made 4 studs from bolts and screwed them into one end with Loctite. I was going to make them 3” long so the height would be the same as the 2 Star but my gasser is 34” tall so I split the difference. The risers make my cooking height 34.5”. The whole thing cost $60.