Cured Meats & Food Preservation > Charcuterie: Ham, Bacon, Sausage, etc.
Ham Brining 101
TentHunteR:
This brining process can be used to make Bacon, Canadian Bacon and Corned Beef, as well as Ham!
Table of Contents
Section 1: Why Brine & What do I need?
Section 2: What's in a Brine - FAQ's about Salt, Sugar & Nitrite Levels
Section 3: Brine & Meat Preparation
Section 4: Injecting & Curing the Ham
Section 5: Smoking & Glazing the Ham
Special Thanks go to my friend Dr. Kevin Galat who has a PhD in chemistry and has done work in the field of microbiology. He is a great source of info.
TentHunteR:
Section 1: Why Brine & What do I need?
► Curing Methods
Curing is a way of preserving meat and gives it that classic cured flavor and pink color we associate with Ham, Bacon, smoked sausage, etc.
Artisan hams, such as Parma & Smithfield, are salted & dry-cured for months, or even years in very strict conditions. Mass-produced hams are machine-injected with a quick-curing brine, and baked in large smoker-ovens. They are rushed and average quality at best.
Brining offers a relatively quick and easy way to make a quality ham at home, and requires very little equipment. Even a few days in the brine improves the "hammy quality" of the flavor and texture!
Two brining methods: We'll use the Pump & Immerse method.
► What's Needed:
√ Some basic equipment,
√ A fresh cut of Pork (preferably a leg cut),
√ Brine Recipe/Ingredients: Water, Salt, Sugar & Curing Salt #1.
Equipment: Chances are you already have these items:
[*]A syringe type meat injector,
[*]A thermometer - to check/monitor the Ham's internal temperature.
[*]A food-safe, lidded container, or brining bag big enough to hold your ham and between 1½ - 3 gallons of brine. Keep in mind, it will need to fit in your refrigerator.
[*]A Grill/Smoker
[/list]
► Which cut of pork to use:
Recommended Fresh Cuts:
Fresh Ham cuts can be purchased as whole, or half cuts. You may need to seek out a butcher to find them.
[*]Whole Ham (often labeled as "Pork Leg) 15 - 26 lbs.
[*]Ham Butt End 8- 13 lbs
[*]Ham Shank End 8- 13 lbs
[*]Picnic Ham (Shoulder) 7 to 11 lbs.
[/list]
Picnic Hams are a great option, especially if you have trouble finding an actual Fresh Ham cut. They're
easier to find, economical, and easy to handle, making them ideal for the average do-it-yourself-er.
I tend to use Picnic Hams more often than actual ham cuts.
Picnic Hams look just like a Ham Shank Half when done
Other Options:
[*]Boston Butt (boneless) - Can be used for: Boneless style ham, or Buckboard Bacon (butterfly into two thinner sections).
[*]Pork Loin (boneless) - Can be used for: Canadian Bacon, Peameal Bacon, or Kasseler Ham (Germany). It's an easy-to-slice ham for sandwich meat.
[*]Pork Sirloin Roast - would make a great cut to cure into a small ham.
[/list]
Make sure it's Fresh!
Whichever cut you choose, be sure it is labeled "Fresh," meaning a cut that's NOT been cooked or cured. Avoid cuts labeled "Enhanced with a solution..."
TentHunteR:
Section 2: What's in a Brine?
FAQ's about Salt, Sugar & Nitrite Levels
Note: This section packs a lot of info and is intended for people who want to know how a brine is formulated.
If you'd rather just follow a recipe, then feel free to move on to Section 3 where I give a basic brine recipe.
So, what's in a brine? A typical curing brine contains: Water, Salt, Sugar, Nitrite Cure, & sometimes Other Flavorings.
The three important factors are:
[*]Brine Strength
[*]Sugar Level
[*]Nitrite Level
[/list]
Once you understand these, you'll be able to customize your own brine recipes that are safe and taste the way YOU want!
► Salt Sense - Which kind of Salt should I use?
[*]Non-iodized table Salt & Sea Salt: Not ideal! Contains anti-caking agents and/or impurities.
[*]Kosher Salt: Good choice - Pure & clean tasting with no additives. Varies in size, so it should be weighed and not measured.
[*]Pickling salt: Best choice! - Inexpensive, made for brining, measures/weighs consistently, AND...
[/list]...it's a Kosher product - NO impurities!
► Brine Strength (Salinity) - How Much Salt should I use?
Brine strength is determined, for the most part, by how salty you like your ham.
How accurate do I need to be?
Weighing is more accurate, but if you use pickling salt and measure according to the chart above, then you will be fine! A little more or less salt in the brine won't make a noticeable difference in your ham.
► Sugar Level (Sweetness)
Sugar cuts the harshness of salt & adds favor. It doesn't affect curing, so how much you use is purely a matter of taste & the type of ham being made. Any natural, water soluble sweetener will work:
[*]Granulated Sugar - provides a non-descript sweetness.
[*]Brown Sugar - Probably my overall favorite. It's cheap with a nice hint of molasses. The darker it is - the more molasses it contains.
[*]Honey Self explanatory!
[*]Maple Syrup Definitely not cheap! If you love Maple (like I do), then consider using regular Sugar + Maple Flavoring.
[/list]
Sweeteners can vary quite a bit by weight, but FORTUNATELY most of them have similar sweetness levels when measured. The one exception is Powdered Dextrose, which is only 70% as sweet as regular sugar.
Basic guide to sweetness level & weight to measure conversion:
► Nitrite Curing Salt
Nitrite's role in curing is important. Besides preventing botulism, it helps develop the color and flavor we desire, and keeps fat from turning rancid.
Which curing salt should I use?
Cure #1 is the best choice for our purpose.
Note: Cure #1 & Tender Quick are NOT interchangeable; Do NOT use Tender Quick in recipes calling for Cure #1!
Common Brands of Cure #1: Prague Powder #1, DQ Cure #1, Insta Cure #1.
The brand is not important, so long as it contains 6.25% sodium Nitrite.
Curing salt is typically pink in color, so it's not confused it with regular salt.
► Nitrite Levels - How much Cure #1 should I use?
USDA policy requires between 120 - 200 Parts Per Million of "ingoing nitrite" for brine-cured meat.
USDA Processing Inspectors Handbook, Pg 12
So, 120 PPM is our goal, but how do we achieve that?
► First off, the popular "1 tsp per 5 lbs meat" rule CANNOT be used for brining!!!
► The Pump Rate (how much you inject, per lb of meat) determines how much nitrite you need per gallon.
[*]Pick your pump rate based on how long you want the ham to cure in the brine: 10% 6-10 days; 20% 4-7 days; 30% (max) 3-5 days (I prefer a 20% or 30% pump rate).
[*]The more brine you inject, the less nitrite you need per gallon, because you're pumping more into the ham.
[*]Example: a 10% pump (10% of the ham's weight) is easy to inject, but a 20% pump uses 50% less nitrite in the brine, because you're injecting twice as much.
[/list]
► So, we need to calculate based on the Pump Rate...
and based on that calculation we get:
Q: Does injecting more brine affect salt & sugar levels too?
A: Not really... The nitrite get's locked in, but given at least a few days, the higher salt & sugar levels in the ham will push their way out until they equalize with the rest of the brine.
► Other Flavorings
Besides sweeteners, you may want to add other flavors to your Ham. Some common flavor ingredients:
[*]Pickling Spice - used for corning beef and works well with Hams too.
[*]Allspice Berries - Gives a classic Holiday Ham flavor of cinnamon, clove, & nutmeg.
[*]Juniper Berries, Coriander seeds, Peppercorns - German style Ham & Bacon
[/list]
►Customizing Recipes
The tables above will make it easy to customize recipes to suit your needs.
Examples:
► If a recipe is too salty or sweet for your tastes, use the "Brine Strength" or "Sweetness Level" charts to adjust the levels to your liking.
► If you like a recipe, but want to inject at a 30% rate instead of 10% - in that case you would leave salt & sugar levels alone and adjust ONLY the amount of Cure #1, according to the "Cure #1 per Gallon" table.
► To build a recipe from Scratch:
1) Pick your Salt level,
2) Pick your Sugar level & Sweetener,
3) Pick your pump rate (10% or 30%) & add the appropriate amount of Cure #1,
4) Add other flavorings as you like,
...and CONGRATULATIONS! You have just customized your own ham brine!
TentHunteR:
Section 3: Brine & Meat Preparation
Once you have your brine recipe, you can begin the process of mixing the brine & curing the Ham.
Here's my basic Brown Sugar Ham Brine recipe. Feel free to use it or create your own (see section 2).
For a 20% injection:
For a 30% injection:
► How much Brine do I need?
There is no hard & fast rule. As long as the ham can be injected and then submerged with plenty of room to move, IT WILL WORK!!!
How is this possible? Equalization! The salt/sugar in the brine & ham move in & out until they reach a state of equilibrium. A ham soaked in a 5% brine will NEVER reach more than 5%, no matter how much brine is used.
Here's a rough guide to how much brine you'll need:
My normal batch is 1 1/2 gallons for a 10 lb picnic ham, or 10 - 12 lbs bacon.
Graduated mixing pails (found in paint depts.) are cheap, and make measuring water and brine easy.
► Water & Spice Prep
Water
Unfiltered tap water MUST be boiled for at least 5 minutes to kill any pathogens and remove chlorine. Allow it to cool to room temp, THEN measure and mix the brine.
IMPORTANT: DO NOT add nitrite cure until AFTER the water has cooled!
I like to use distilled or filtered water. It's cheap, there's no off tastes (chlorine, sulfur, etc.) and you don't have to boil it!
Spice Prep - Flavoring the Brine
If you're adding any spices to your brine, simmer them in a small pan of water first, then allow it to cool while the spices steep and release their flavors. When mixing the brine, add the spices & Spice-liquid making sure to count it as part of the water to be used when measuring.
The brine will be infused with the spice flavors, which go deep into the ham when you inject!
►Mixing the Brine
* Measure the water into a non-reactive container large enough to vigorously stir without making a mess. A stainless steel stock pot works really well for this!
* Carefully measure and add the Sugar, Salt & Nitrite Cure
* Stir until all the salts & sugars are dissolved.At first the brine may look cloudy with foam on top. This is normal and will clear up!
Place the brine in the refrigerator to start chilling while you prep the ham.
►Meat Prep
Before Brining can begin, there's a little meat prep that needs to be done.
Skin/Rind - If the skin is still on the ham, it should be removed or it will make injecting difficult and will affect brining & smoke absorption.
This task will require a very sharp thin bladed knife such as filet or boning knife. Start at a corner and make an incision just under the skin. Continue carefully slicing along the underside of the skin as you peel it back with your other hand. A paper towel can help grip the slippery skin.
Don't worry if it doesn't look perfect; it won't matter once it's smoked.
Fat - Trim the fat as you see fit. I like to trim most of it off, leaving a thin layer.
Aitch Bone (hip bone) - If you purchased a Butt Half or Whole Ham look at the rump end and you should see an oblong bone that looks similar to the bone in a Pork Butt. This is the Aitch (or hip) bone and should be removed, otherwise injecting and slicing this end of the ham will be difficult.
Locate the bone by feel, then using a sharp boning or filet knife, CAREFULLY cut around the entire back side of the bone plate to expose the ball & socket joint. Then slice all the way around and through the ligament holding it together. You may need to pull or twist the bone to separate the joint.
Tip: Leave the meat on this bone and DON'T throw it away! Stick it in the brine to cure, then smoke it along side the ham to use it in a pot of beans. Delicious!
Now you're ready to start brining!
TentHunteR:
Section 4: Injecting & Curing the Ham
► Measuring the Brine
To measure out the amount of brine to be injected, you need to know:
1) The ham's weight,
2) The Pump Rate (how much to inject per lb of meat).
If you followed section 2 and made your own brine recipe, then you will already know what your Pump Rate is, otherwise follow the recipe's directions. It will say something like, "Pump to 10% of the ham's weight," or "...use a 20% pump."
* If weighing your brine, use this formula: Ham's Weight X Pump Rate = How much Brine to inject
* If you don't have scales, fortunately 1 liq. oz of brine weighs approximately 1 oz, so...
use this formula: Ham's Weight X Pump Rate X 16 = How many liquid oz to inject
* or... just follow the table below.
► Injecting
* You will need a syringe type injector, and a tub to hold the ham and catch brine while you inject.
* Be sure to inject thoroughly around the bones to prevent bone souring! After that, inject as evenly as possible throughout the rest of the ham.
As a rough guideline:
[*]For a 10% pump you will inject about 1/2 oz. every 2 inches or so, flip the ham over and repeat.
[*]For a 30% pump you will inject 1/2 oz. about every inch or so...
[*]If a little brine seeps out, that's OK. If a lot seeps out, collect and re-inject it.
[/list]
► Curing the Ham
After injecting, the ham is now ready to be immersed and begin the curing process. During this time the salt & sugar
will equalize throughout the ham, and it will take on its characteristic color, texture and flavor.
Place the ham in it's brining container and add the remainder of the brine making sure the ham is completely submerged.
Use a small heavy plate to weigh it down if necessary.
For larger hams, a brining bag is a good option. Be sure to put it in a container just in case the bag leaks!
Place the covered container is the refrigerator and cure at the following rate:
► Other Uses
Don't forget you can use this method to cure other meats such as:
Bacon, Canadian & Buckboard Bacon or Corned Beef.
Navigation
[0] Message Index
[#] Next page
Go to full version