Just finished mod on PG24; adding a second cooking rack.
Had spare lower grate to reuse. Needed to by 17 1/2 deep, so I made a jig and bent it.
Used Dremel to cut rivets and remove 1/4 shelf angles.
Used rear rivet holes as pilot and drilled out to 1/4 inch
Measured and drilled front holes
Installed two 1/4 stainless steel threaded rods with shoulder washers and nuts
![](http://uploads.tapatalk-cdn.com/20160903/91b7f16b8abd295d756bcfd825cf29ee.jpg)
![](http://uploads.tapatalk-cdn.com/20160903/4755f2c6c34eb6cce8985a7fc9304b36.jpg)
![](http://uploads.tapatalk-cdn.com/20160903/a5de9b1786fd9399d445cd2d88b99d9c.jpg)
![](http://uploads.tapatalk-cdn.com/20160903/1858f9297472bd1b0d6175f61b688345.jpg)
Sent from my iPhone using Tapatalk