Maple Baked Beans and Ribs on D. Boone

[hikerman]

Looks like that DB got you covered! Great looking ribs!

Is there a optional upper rack available for the DB? If not you could modify it to have one

You are right Mike, I do need another rack. There is an optional one available. There are two half-racks so a mod would be a little difficult, from what I've seen that others do. Any suggestions?

[muebe]

Looks like that DB got you covered! Great looking ribs!

Is there a optional upper rack available for the DB? If not you could modify it to have one

You are right Mike, I do need another rack. There is an optional one available. There are two half-racks so a mod would be a little difficult, from what I've seen that others do. Any suggestions?

You will need to take a measurement of the depth and length required. Then do a search for a universal grill rack that has that measurement. Some are actually adjustable. Then some supports will need to be installed on each side of the rack. You can either makes some legs that raises the rack up or install brackets on the interior sides of the DB to support the rack.

[Sam3]

Real nice!

[sliding_billy]

Wow.  Nice plate!

[hikerman]

Looks like that DB got you covered! Great looking ribs!

Is there a optional upper rack available for the DB? If not you could modify it to have one

You are right Mike, I do need another rack. There is an optional one available. There are two half-racks so a mod would be a little difficult, from what I've seen that others do. Any suggestions?

Thanks Mike!
You will need to take a measurement of the depth and length required. Then do a search for a universal grill rack that has that measurement. Some are actually adjustable. Then some supports will need to be installed on each side of the rack. You can either makes some legs that raises the rack up or install brackets on the interior sides of the DB to support the rack.

[cookiecdcmk]

Here is a link to a post from Old Dave showing his 2nd shelf.  I have made it and it works well.  There are also many other ideas out there on how to make a 2nd shelf.

http://pelletheads.com/index.php?topic=18247.msg173694#msg173694

[mikecorn.1]

Here is the shelf I made for my Traeger



Got it from my mom's old gasser she was getting rid off. Got some carriage bolts, nuts, and washers and put it together. Works for me.
I have another shelf identical that I'm going to cut in half longways so I can use for a different application.


Mike
Sent from my iPhone 5 using Tapatalk

[hikerman]

Thanks much Cookie and Mike.....appreciate the help!

[Savannahsmoker]

Wowser on the Ribs an I will try the beans recipe.